De Dietrich AD251 Montageanleitung Seite 6

English
Installing the outside sensor
To mount the outside temperature sensor, proceed as follows:
1 Pair the outside temperature sensor with the radio module - Package AD252
2 Select the position for the outside temperature sensor
It is important to select a place that allows the sensor to measure the
outside conditions correctly and effectively.
Advised positions:
- on one face of the area to be heated, on the north if possible
- half way up the wall in the room to be heated
- under the influence of meteorological variations
- protected from direct sunlight
- easy to access
A: recommended position on a corner
B: Possible position
H: Inhabited height controlled by the sensor
Z: Inhabited area controlled by the sensor
6
All manuals and user guides at all-guides.com
Each outside temperature sensor is given a unique identifying
number in the factory, which enables the radio module to recognise
it. The identifying number is transmitted to the radio module by the
pairing sequence.
C002449-B
- masked by a building element (balcony, roof, etc.)
- close to a disruptive heat source (sun, chimney, ventilation grid,
AD251
Refer to the assembly instructions for the radio module.
Positions to be avoided
etc.)
8800N002-C
23/06/2011 - 300020521-001-C