Herunterladen Inhalt Inhalt Diese Seite drucken

Velleman VTSSC78 Bedienungsanleitung Seite 5

Lötstation – 80 w/230 v
Vorschau ausblenden Andere Handbücher für VTSSC78:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 27
5.
Features
electronic temperature control
password lock
sensor and heater fail notification
LED display with digital temperature scale (°C or °F)
with on/off switch
ceramic heating element with temperature sensor
spare bits:
0.4 mm: BITC03
o
0.8 mm: BITC201
o
1.6 mm: BITC20
o
spare parts:
barrel and nut assembly + heater holder: VTSSC75/SP1
o
6.
Overview
Refer to the illustrations on page 2 of this manual.
1
display
2
SET button
3
DOWN button (▼)
4
UP button (▲)
5
power switch
6
earth connection
Display
A
temperature indication
B
temperature unit (°C or °F)
Fuse Replacement
X
screw
7.
Description
This soldering station is designed to meet the present and future needs of the electronic production
industry. The soldering station is engineered to meet the stringent demands of hobbyist,
maintenance personnel, and production staff alike.
The electronic circuitry enables you to set soldering temperatures between 150 and 480 °C (302 to
896 °F) without replacing the tip. The temperature is maintained to within ± 5 °C (± 9 °F) of the
normal operating temperature.
Heater fail detection: If the heater circuit fails, the display shows "HFFE" and heater power is cut.
Temperature lock features: The temperature can be locked with a password for use in a production
line.
The "zero voltage" switching design protects voltage and current sensitive components (such as
CMOS devices) against transient voltage spikes that can be caused by switching the power or heater
on/off, or other environmental conditions.
The highly insulated ceramic heating element and 80 W power result in rapid heatFup, instant
recovery, and superior heat transmission.
The ergonomic and slender handle with a comfortable rubber grip prevents operator fatigue. The
soldering iron is attached to the base unit using a nonFburning silicone rubber cord.
The tip is grounded through the power unit to ensure leakage of less than 0.4 mV.
V. 01 – 12/04/2016
VTSSC78
7
barrel
8
nut
9
bit
10
heater element
11
heater holder
12
handle
C
heating indication
F
fuse
5
©Velleman nv

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis