Additional Documents For Safety; Use According To Destination; Basic Requirements For A Safe Use; Unauthorized Use - XS Instruments OXY 7 VIO Betriebsanleitung

 Additional documents for safety
The following documents can provide the operator with additional information to work with the measuring
system safely:
 operating manual for electrochemical sensors;
 safety data sheets for buffer solutions and other maintenance solutions (e.g. storage);
 specific notes on product safety.
 Use according to destination
This instrument is designed exclusively for electrochemical measurements both in the laboratory and
directly in the field. Pay attention to the technical specifications shown in the INSTRUMENT FEATURES /
TECHNICAL DATA table; any other use is to be considered unauthorized. This instrument has left the factory
in perfect technical and safety conditions (see test report in each package).
The regular functionality of the device and the operator safety are guaranteed only if all the normal
laboratory safety standards are respected and if all the specific safety measures described in this manual
are observed.
 Basic requirements for a safe use
The regular functionality of the device and the operator safety are guaranteed only if all the following
indications are respected:
the instrument can be used in accordance with the specifications mentioned above only;

use the supplied power supply only. If you need to replace the power supply, contact your local

distributor;
 the instrument must operate exclusively in the environmental conditions indicated in this manual;
no part of the instrument can be opened by the user.
Do this only if explicitly authorized by the manufacturer.
 Unauthorized use
The instrument must not run, if:
it is visibly damaged (for example due to transportation);

it has been stored for a long period of time in adverse conditions (exposure to direct light, heat sources

or places saturated by gas or vapours) or in environments with conditions different from those
mentioned in this manual.
 Device maintenance
If used correctly and in a suitable environment, the instrument does not require maintenance procedures.
It is recommended to occasionally clean the instrument case with a damp cloth and a mild detergent. This
operation must be performed with the instrument off.
The housing is in ABS / PC (acrylonitrile butadiene styrene / polycarbonate). This material is sensitive to
some organic solvents, for example toluene, xylene and methyl ethyl ketone (MEK).
If liquids get into the housing, they could damage the instrument.
Do not open the instrument housing: it does not contain parts that can be maintained, repaired or replaced
by the user. In case of problems with the instrument, contact your local distributor.
It is recommended to use original spare parts only. Contact your local distributor for information. The use
of non-original spare parts can lead to malfunction or permanent damage to the instrument. Moreover, the
use of spare parts not guaranteed by the supplier can be dangerous for the user himself.
For the maintenance of the electrochemical sensors, refer to the documentation present in their packaging
or contact the supplier.
UM Serie Oxy7Vio EN rev.0 28.05.2020
6
EN