Setup Menu; Setup Menu Structure; Temperature Measurement Atc - Mtc - XS Instruments OXY 7 VIO Betriebsanleitung

Setup Menu

 In measure mode, press the key
the directional keys and confirming with key
 Within the selected menu, move between the different programs using the directional buttons and
press the button
 Using the keys
confirm with
The value or parameter that is being edited is recognizable as it flashes on the display.

 The icon indicates that the value or parameter to choose is editable using the directional keys.
 Press the key to return to the previous menu.
 Setup menu structure
P5.0 DO SETTINGS
P9.0 SETTINGS
Temperature measurement ATC – MTC
ATC : The direct measurement of the sample temperature for all parameters is carried out through the

NTC 30KΩ probe, integrated into the sensor.
MTC : If no temperature probe is connected, the value must be changed manually: keep pressed

or until the value starts to flash; then adjust it by continuing to use the directional keys; press
to confirm.
Note: with the polarographic sensor supplied together with the instrument, the manual
temperature compensation (MTC) IS NOT TO BE PERFORMED.
UM Serie Oxy7Vio EN rev.0 28.05.2020
to enter SETUP mode, select the parameter to edit by using
OXY 7 Vio
DO SETTINGS
SETTINGS
to access the submenu you want to edit.
and choose the desired option or change the numerical value and
.
.
P5.1 Cal 0
P5.2 Salt Compensation
P5.6 Cal Data
P5.8 Reset Settings
P5.9 Temp Cal
P9.1 Temperature U.M.
P9.3 Backlight mode
P9.4 Brightness
P9.5 Sleep Mode
P9.8 Reset Settings
P9.9 Auto Power-Off
12
EN