Setting The Temperature Unit; Changing The Batteries; Measuring Your Weight - Beurer GS 80 Gebrauchsanleitung

Activating/deactivating the alarm clock
Press the ALARM button in standby mode. The alarm symbol
ALARM button again deactivates the alarm clock. An accelerating acoustic signal sounds at the set alarm
time. Press the SNZ button to activate the snooze function; in this case, the alarm sounds again after 5 min-
utes. Press any button to deactivate the alarm clock.

Setting the temperature unit

In standby mode, press the
Confi guring the weather station
Start by setting the current weather situation. Press and hold the
Now use the button to select the weather situation 12 hours previously. Confi rm using the
station displays the next change of weather in the next 12 hours.
The scale uses a range of diff erent weather symbols to provide weather information in as much detail as pos-
sible. Depending on the weather forecast, the scale displays a sequence of fl ashing weather symbols:
Sunny
Partly Cloudy
Cloudy
Rainy
Torrential Rain
Snowy
The weather forecast is based on changes in atmospheric pressure. Pressure values are compared on
an hourly basis. If the atmospheric pressure rises, an area of high pressure can be expected. The indi-
cated forecast changes towards the "sunny" end of the weather scale. The opposite applies in the case
of declining atmospheric pressure.

6. Changing the batteries

The scale is equipped with a low battery indicator. If the batteries become too weak, "
play (1) and the scale switches off automatically. In this case, the batteries must be replaced as soon as pos-
sible (4 x 1.5 V, type AA).
The batteries in the outdoor sensor must be replaced when the scale no longer receives a radio signal (2 x 1.5 V,
type AAA). Press and hold the CHANNEL button for 3 seconds to search for the outdoor sensor. Ensure that
channel 1 (CH1) is set on the scale.

7. Measuring your weight

Place the scale on an even, hard surface (no carpet); a hard surface is crucial to accurate measurements.
Tap the scale with your foot; "
Stand still with your weight distributed equally on both feet. The measurement is displayed shortly afterwards.
button to select between °C and °F.
1.
[al " briefl y appears in the display, followed by " 0. 0 kg". Step onto the scale.
appears in the display (2). Pressing the
button until an acoustic signal sounds.
2.
button. The
3.
Lo " appears in the dis-
4.
9