Display Information - MPF Drive 5.1 Bedienungsanleitung

DISPLAY INFORMATION

Press button M to switch between displayed information.
CURRENT CADENCE :
The Current Cadence shows the pedal revolution per minute (rpm).
CLOCK: 12HR OR 24HR CLOCK :
Clock can be displayed either in 12HR or 24HR format.
TRIP DISTANCE :
The Trip Distance function accumulates the riding distance from the last RESET.
RIDE TIME :
The Ride Time accumulates the riding time from the last RESET.
AVERAGE SPEED :
Average speed is calculated from the Trip Distance divided by the Riding Time
counted from the last RESET.
MAXIMUM SPEED :
Shows the Maximum Speed from the last RESET.
ODOMETER :
The ODO accumulates the total riding distance from the last All Clear operation.
BOOST MODE :
When activating the Boost function the e-bike will move independently up to a
speed of rd. 4~6kph (2.5~3.8mph) as long as the button will be kept pressed.
The function may be only used when pushing the bike.
REMAINING RANGE :
Estimated range of the installed battery-pack charge (estimation based on constant
conditions of assistance level, route profile, etc.). Function is available only in
combination with CAN bus batteries.
GEAR SHIFT INDICATOR :
When choosing RPM on the screen actual pedal cadence will be shown.
To achieve best system efficiency the up ↑ or down ↓ "cursor" indicates when to
shift the bicycle gears.
www.mpfdrive.com
Technical modifications, changes and errors excepted
DATA RESET MODE :
Press R button to reset data to 0 for DISTANCE, RIDETIME, AVERAGE,
and MAXIMUM.
Data Reset is only available with bike in standstill position.
When "Err" appears on the display, check the correct
position of the speed sensor.(FIG. A)
symbol.(FIG. B): Temperature of the motor unit
too high. Allow the motor to cool down. Continued
travel without motor support is possible and speeds up
the cooling process.
SUPPORT LEVEL
The level of assistance when pedaling can be adjusted via the control unit and will
be shown on the display C .
The assistance level can be changed anytime, even during riding.
In total 10 assistance levels can be chosen to get the right power support for your
actual riding situation.
Press + button L to increase or – button R to decrease the support level by one step.
If you keep the button pressed the support level will continuously in- or decrease.
The support level is shown on the display A .
By decreasing the support level to "zero" no support from the motor will be given and
the e-Bike can be operated as a normal bicycle through pedaling.
Level 1 Level 5 Level 10
11 www.mpfdrive.com
Technical modifications, changes and errors excepted
Level 1 : 50% support, effective assistance for
maximum riding range
Level 5 : 120% support, powerful assistance for
city and off road rides
Level 10 : 250% support, maximum assistance for
steep climbs and sportive riding
experience.
12