Herunterladen Inhalt Inhalt Diese Seite drucken

Battery; Speed Sensor - MPF Drive 5.1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

BATTERY

Battery System MPF DRIVE Juice
Capacity [Ah]
9 / 12
Weight [Kg]
2,8
Protection
IP54
rating
Capacity
5 LED show
control
charging status
Charging time
rd. 4-6 hours
(2A charger)
rd. 1,5-2,5 hours
(5A charger)
BATTERY INDICATOR
Press button 6 to turn on the battery
indicator on the battery.
The LEDS will show the actual charging
status of the battery.
Battery deep sleep mode: In case the
battery is not used for a long time,
it will fall into deep sleep mode to prevent
the battery from deep low discharge.
To restart the battery press the button 6 .
www.mpfdrive.com
Technical modifications, changes and errors excepted
BATTERY CHARGER
WARNING
MPF DRIVE batteries shall only be
recharged with original MPF DRIVE
chargers. Never apply short circuit to
the battery by connecting the contacts
of the battery. Never open the battery
housing as it could damage the battery
and possibly lead to short circuit,
overheating or ignition of the battery.
Opening of the battery case leads to
the loss of warranty. Do never install or
use a battery which has obvious
damage to the housing or the connector.
To charge the battery place it into the
holder firmly. Plug in the connector to
an electrical outlet. Both LEDS on the
charger will get illuminated. When
charging operation is complete, one
LED will turn to green light.
After charging the battery needs to be
disconnected from the holder.
Since Lithium-Ion battery cells do have
a very low self-discharge rate a
continuous connection of the battery to
the power supply is not necessary.
BATTERY HANDLING
RECOMMENDATIONS
In case of long storing fully charge the
battery and store the battery at
temperatures between 10°C and 25°C.
Store the battery separately from the
e-Bike.
Do not store the battery at temperatures
below -10°C or above 45°C.
Do not expose the battery to extreme
temperature changes or humidity and
prevent the connectors from corrosion.
Always protect the battery against
physical damages.
Heavy impacts may lead to short-
circuit concluding into overheating or
ignition of the battery.
Never touch any battery leakage.
Never let any children or pets touch the
batteries.
BATTERY DISPOSAL
The local laws must be followed for the
battery disposal.
Only for EC countries:
According to the European
Guideline 2002/96/EC,
electrical devices/tools that
are no longer usable, and
according to the European Guideline
2006/66/EC, defective or used battery
packs/batteries, must be collected
separately and disposed of in an
environmentally correct manner.
Please return batteries that are no
longer usable to an authorized bicycle
dealer.
15
www.mpfdrive.com
Technical modifications, changes and errors excepted

SPEED SENSOR

The Speed Sensor together with its
spoke magnet measures the bike speed
and gives important information to the
motor control unit to calculate the
needed support of motor power. The
speed sensor signal is also needed to
cut off the motor support when the bike
reaches the legal allowed speed of
25kph or 45kph.
In case the system will not
detect a speed signal, the
display will show "Err".
WARNING
If the clearance between the speed
sensor and the spoke magnet is over
15 mm or the speed sensor is not properly
connected the speed signal will not be
detected by the motor control unit and
motor support.
16

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis