TABLE OF CONTENTS ENGLISH GETTING STARTED ----------------------------------------------- P5 USER PRECAUTIONS --------------------------------------------- P5 OVERVIEW ON THE MPF DRIVE SYSTEM -------------------- P6 TECHNICAL DATA -------------------------------------------------- P7 CONTROL UNIT AF --------------------------- --------------------- P8 CONTROL UNIT LW ------------------------------------------------ P13 HOW TO RIDE ------------------------------------------------------ BATTERY...
Seite 3
www.mpfdrive.com www.mpfdrive.com Technical modifications, changes and errors excepted Technical modifications, changes and errors excepted...
Seite 4
36 36 36 36 Battery Change USB Charger Batteriewechsel USB Schnittstelle Battery Cap Batterie Deckel Battery CR2032 Batterie CR2032 www.mpfdrive.com www.mpfdrive.com Technical modifications, changes and errors excepted Technical modifications, changes and errors excepted...
This normally Make sure that the brakes are operating MPF DRIVE SYSTEM CONSISTS OUT OF 4 COMPONENTS reduces the lifetime of the system and properly before riding the bike. risks damage to the drive unit and the bike.
TECHNICAL DATA: CONTROL UNIT AF (ADVANCED FUNCTION) POWER ON / POWER OFF CONTROL UNIT AF MPF DRIVE 5.1 Motor Data (Advanced Function) POWER OFF POWER ON Press S key to power on Press S key to power off Nominal Power [ W]...
COMPUTER SETUP BATTERY CHARGE STATUS INDICATOR B RESET THE COMPUTER (ALL CLEAR) The battery charge status indicator B shows the charge status of the e-Bike's battery. Each bar on the indicator is equivalent to a capacity of approx. 20 %: 100% Battery app.40% Battery recharge Battery...
DISPLAY INFORMATION DATA RESET MODE : Press R button to reset data to 0 for DISTANCE, RIDETIME, AVERAGE, and MAXIMUM. Data Reset is only available with bike in standstill position. When ”Err” appears on the display, check the correct Press button M to switch between displayed information. position of the speed sensor.(FIG.
General rules: – For the same motor output of the MPF DRIVE: The less power or force that you have to bring about to reach a certain speed (e.g. through optimal use of the gears), the less energy the e-Bike will consume, and the greater the range for one battery.
Capacity [Ah] 9 / 12 temperatures between 10°C and 25°C. motor control unit to calculate the MPF DRIVE batteries shall only be Store the battery separately from the needed support of motor power. The Weight [Kg] recharged with original MPF DRIVE e-Bike.
MPF DRIVE not related to any of the following cases functional replacement components of g) Use of the battery in systems that are system or any components belonging expressly excluded under this warranty.
Tragen Sie immer einen Schutzhelm, Sie verringern hiermit in der Regel die wenn Sie mit einem Elektrofahrrad Lebensdauer des Systems und riskieren MPF DRIVE System besteht aus 4 Komponenten fahren. Er dient Ihrer persönlichen Schäden am MPF DRIVE System und Sicherheit.
BEDIENEINHEIT AF ( ADVANCED FUNCTION) TECHNISCHE DATEN: SYSTEM EIN / SYSTEM AUS BEDIENEINHEIT AF MPF DRIVE 5.1 Motor Daten SYSTEM AUS SYSTEM EIN (Advanced Function) Nominelle Leistung [W] USB Anschluss Spannung [V] -Max. Ladestrom [mA] Max. Drehmoment [Nm] -Ladespannung [V] Gewicht [kg] ca.
Einstellen des Displays BATTERIE LADESTATUS ANZEIGE B Zur cksetzen aller Einstellungen (All Clear) ü Die Ladestatusanzeige B am Display zeigt den aktuellen Ladezustand der Batterie des e-Bikes bei eingeschaltetem System. Jedes Segment der Ladestatusanzeige entspricht ca. 20% der Batterieladung. 100% Batterie ca.
DISPLAY INFORMATION Daten zurucksetzen : Drucken der R Taste stellt DISTANCE, RIDETIME, AVERAGE und MAXIMUM auf 0. Der Computer setzt alle DISTANCE, RIDETIME, AVERAGE und MAXIMUM Daten auf 0. Falls “Err” (FIG. A) am Display angezeigt wird übereprüfen Sie die korrekte Postionierung des Drücke Knopf M um die Anzeigefunktionen zu wechseln Geschwinsdigkeitsensors.
BEDIENEINHEIT LW (LIGHT WEIGHT) FAHREN System Start/ On : Der MPF DRIVE Antrieb unterstützt Sie beim Fahren, solange Sie in die Pedale treten. Drücken des ON/OFF Knopfes 1 für 1 Sekunde - LED POWER Ohne Pedaltreten erfolgt keine Unterstützung. leuchtet blau 4 auf. Das System ist einsatzbereit im ersten Die Motorleistung ist immer abhängig von der beim Treten eingesetzten Kraft.
Kombination mit dem Speichenmagnet WARNING Kapazität [Ah] 9 / 12 nach 6 Monaten den Ladezustand des die Fahrzeuggeschwindigkeit und gibt MPF DRIVE Akkus dürfen nur mit Akkus und laden diesen wieder wichtige Informationen zur Gewicht [Kg] dem original Ladegerät geladen vollständig auf.
Gewährleistung gegeben. advance by persons who have not been Produktnummer der MPF DRIVE 3. Die Gewährleistung umfasst die authorized by MPF DRIVE will not be Komponente wurde verändert, gelöscht, Reparatur und/oder den Austausch der reimbursed. In such a case, any beseitigt, verwischt oder überschrieben.