English; Temperature Range - i.safe MOBILE IS655.2 Schnellstartanleitung

ENGLISH

EX MARKINGS
ATEX:
II 3G Ex ic IIC T4 Gc IP54
II 3D Ex ic IIIB T135°C Dc IP54
Certificate of conformity:
EPS 19 ATEX 1 129 X
CE-designation:
IECEx:
Ex ic IIC T4 Gc IP54
Ex ic IIIB T135°C Dc IP54
IECEx Certificate: IECEx EPS 19 .0064X
UKCA:
II 3G Ex ic IIC T4 Gc IP54
II 3D Ex ic IIIB T135°C Dc IP54
CML 21UKEX2495X
UKCA-designation:
EX-RELEVANT SAFETY REGULATIONS
Use of this device assumes that the operator observes the conventional safety regulations and
has read and understood manual, safety instructions and certificate .
The following safety regulations must also be complied with:
Inside ex-hazardous areas the covers of all interfaces must be closed .
To ensure the IP-protection, it has to be ensured that all gaskets are present
and functional . There must be no large gap between the two halves of the housing .
The device may only be charged outside ex-hazardous areas .
The device may only be charged at ambient temperatures between +5°C . . . +35°C .
Physical connections to other equipment are only allowed outside ex-hazardous areas .
The device may not be exposed to any aggressive acids or alkalis .
The device may only be used in zones 2 or 22 .
Only accessories approved by i.safe MOBILE GmbH may be used .
EX-RELEVANT SAFETY REGULATIONS FOR NORTH AMERICA
The headset connector and the USB micro connector are to be used in non hazardous areas only .
The battery may be charged outside explosion hazardous areas only using approved external
adapter model ICP12-050-2000B with output rated 5Vdc, 2A or other external approved AC/
DC adapter for use in US and Canada which also complies with the requirements of LPS and
has output rated 5Vdc, 2A .
The battery pack is placed permanently into the housing therefore do not detach the two
halves of the enclosure . It is not user serviceable or interchangeable .
In order to maintain the IP64 protection, do not detach the two halves of the enclosure .
The device must be protected from impacts with high impact energy, against excessive UV
light emission and high electrostatic charge processes .
North America:
Class I Div 2 Groups A, B, C, D, T4
Class II Div 2 Groups F, G , T135˚C
Class III Div 2

Temperature range:

-10°C ... +60°C (EN/IEC 60079-0)
-10°C ... +55°C (EN/IEC 62368-1)
Manufactured by:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
EN 3