Before Starting Up; Installation - Silvercrest 368308 2010 Kurzanleitung

13 Notch
14 Adapters
15 Plunger extension
5.

Before Starting Up

Before you can start to use the device, you must remove
the plastic tag out of the battery compartment (6).
1.
Remove the cover of the battery compartment (6).
2.
Pull the plastic tag out of the battery compartment (6).
3.
Replace the cover of the battery compartment (6).
4.
Set the date and time.
Wait a moment while the device prepares itself for instal-
lation. As soon as the device is ready for installation
appears in the display.
6.

Installation

Caution! Risk of burns through
hot radiator valve! Contact could
lead to hands being burned.
▸ Allow the radiator to cool down
before completing any installation,
disassembly or repair work on the
device!
▸ Wear work gloves!
Installation of the device is easy. It is not necessary to
drain the heating water or alter the heating system. It is
not necessary to use any special tools or switch off the
heating system.
24
Gi