Bluetti AC300 Benutzerhandbuch Seite 44

Just Power On
051 PV1 Over Voltage
052 PV2 Over Voltage
053 D-BAT Full
054 D-BAT Drained
Inverter Overload
055
Warning
056 AC Overload Warning
057 Grid Voltage High
058 Grid Voltage Low
059 Grid Frequency High
060 Grid Frequency Low
Multi Communication
061
Error
062 Multi Address Error
Multi Synchronization
063
Error
064 Multi Brak Phase Error
Please check if the open circuit voltage
of solar panels exceeds the input voltage
standard of AC300.
Please check if the open circuit voltage
of solar panels exceeds the input voltage
standard of AC300.
The battery is full.
Empty of battery.
When SOC ＞ 5%，the alarm is cleared.
You need to turn AC ON again on the screen.
The output power of load exceeds.
The output power of load exceeds.
Please check whether the grid voltage fits the
input voltage standard of AC300.
Please check whether the grid voltage fits the
input voltage standard of AC300.
Please check whether the grid frequency fits
the input frequency of AC300.
Please check whether the grid frequency fits
the input frequency of AC300.
Please check whether the communication
cable is connected correctly.
Clear the alarm history or restart the unit.
Please check whether the communication
cable is connected correctly.
Please check whether the communication
cable is connected correctly.
Clear the alarm history or restart the unit.
Please check whether the communication
cable is connected correctly.
Clear the alarm history or restart the unit.
Please check if the input of the AC voltage
meets the specifications of the unit.
Clear the alarm history or restart the unit.
41