Bluetti AC300 Benutzerhandbuch Seite 27

8.3. Dual Charging
By using BLUETTI Wind Turbines, an ultra-
connect, highly efficient wind charger lets
you harness the wind to rapidly recharge
the AC300+B300.
Wind Turbine
Now, you can also get dash charging via the
EV charging stations all over the US soil.
EV Charging
Station
Charging Method 5: Supports charging the AC300+B300 with CP1 and CP2 at
same time. You can use any charging methods listed previously, simultaneous,
to maximize charging power input. They are listed here again for your
convenience. Select one method for CP1 and one method for CP2 for
simultaneous charging.
CP1 Charging Port Select:
Method 1: GEN charging cable
CP2 Charging Port Select:
DC Input1:
Method 3: Solar panels (DC Input Source 1, Select PV on the touchscreen)
Method 4: T500 charging adapter (DC Input Source 1, Select Others on the
touchscreen)
Method 5: 12V Car Charger/Storage battery (DC Input Source 1, Select Others
on the touchscreen)Method 6: 24V Car Charger/Storage battery(DC Input
Source 1, Select Others on the touchscreen)
Aviation Port 1(CP1)
Aviation Port 1(CP2)
Method 2: AC charging cable
24
Wall Outlet
Generator
Solar panels
T500 adapter
Car
Lead-acid Battery
BLUETTI