Bluetti AC300 Benutzerhandbuch Seite 37

CONNECTION 2 (Power Mode)
In Split Phase Power System, it is recommended that you choose the Fusion AC
Input Cable. The AC input ports of the two set of AC300+B300 should be connected
to be as the phase sequence: L1,N,PE and L2,N,PE. Make sure that the phase
sequence of the two machines is correct.
Wrong Connection will damage the power station and your warranty will be
invalid, BLUETTI will not take responsibility for the damage caused by personal
negligence or wrong operation.
The Fusion AC Input Cable(Optional Purchase) is designed to power the Split Phase
System. One end of the cable is going to be connected to NEMA L14-30 socket, and
connect the aviation plugs to the AC input ports of the two set of AC300+B300.
The current of AC input plug: ≥ 30A.
X(L1)
W(N)
Y(L2)
G(PE)
L1 PE L2 N
AC Input
Cable(L14-30)
WRONG CONNECTION
It`s forbidden to charge AC300+B300 through the original AC charging
cable in Split Phase System, please use Fusion AC Input Cable(Optional
Purchase) to charge the two set of the AC300+B300 in Split Phase
System.
Wrong Connection will damage the power station and your warranty will
be invalid, BLUETTI will not take responsible for the damage caused by
personal negligence or wrong operation.
L1 N PE
34
BLUETTI
L2 N PE