Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
8
waste material
9
waste material
USE
0
- connect charger to power source as illustrated
- insert battery into charger
- red light H will turn on indicating that the battery is
being charged
- red light H will stay on as long as the battery is
connected to the charger and the charger is in the wall
socket
! remove battery from charger after charging
period has ended thereby lengthening the service
life of the battery
IMPORTANT:
and the battery may be used
indicate a problem
- do not charge at temperatures below 0°C and over
the charger
! a battery that is new or has not been used for a
longer period does not develop its full capacity
until after approximately 5 charging/discharging
cycles
!
cannot be activated
! change direction of rotation only when tool is at a
complete standstill
$
- insert the bit as deep as possible in the chuck
! do not use bits with a damaged shank
- output torque will increase as clutch ring D is rotated
drilling or driving heavy duty work
and increase until the desired depth has been reached
! while working, always hold the tool at the
grey-coloured grip area(s)
@
#
%
^
2 uncovered
APPLICATION ADVICE
! only use sharp bits
- lubricate drill bit occasionally with oil
the wood
hole
MAINTENANCE / SERVICE
- clean charging contacts in charger with alcohol or
contact cleaner
! unplug charger from power source before
cleaning
power tools
- send the tool or charger undismantled together with
service station (addresses as well as the service
battery to your dealer or the SKIL service station
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
2
must be collected separately and returned to an
- symbol 8
disposing occurs
domestic waste (symbol 9
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
9
&
*
(
)
¡
both charger and
Werbung
Inhaltsverzeichnis
