Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ELECTRIC CHAINSAW
SKU/ Model
Maximum power, W
Voltage, V/Hz
Bar Length, inches/centimetres
Chain pitch, inches
Number of links
Groove width mm
Chain speed, m/s
Chain brake response time, s
Dimensions L×W×H, cm
Gross weight, kg
Unpacking
To remove the device from the package, remove the packing tape, open the box and carefully remove
the accessories.
ATTENTION!
After unpacking and transporting, always check the equipment and the technical condition
of the product.
Packaging materials are recommended to be kept in case the device is transported.
Installing guide bar and chain
ATTENTION!
Always wear protective gloves when working with the chain.
1. Make sure the device is turned off. Set the saw on a flat surface.
2. Pull the chain brake guard 1 (fig. 4), unscrew the clamp 2 (fig. 4) and remove the protective cover 3 (fig. 4).
3
3. Lay the chain 1 (fig. 5) in the groove 2 (fig. 5) located around the perimeter of the bar.
4. Make sure that the direction of the chain links matches the marking on the saw housing 1 (Fig. 6).
TECHNICAL CHARACTERISTICS
956127/ ECS-1800P 956137/ ECS-2000P 956147/ ECS-2200P
WORK RULES
1
2
Fig. 4
1800
230/50
14/35
16/40
53
48×26,5×21
48×26,5×21
5,6
1
Fig. 5
2000
2200
16/40
3/8
57
57
1,3
13,5
0,12
48×28×20,5
5,6
5,7
2
7
Werbung
Kapitel
Inhaltsverzeichnis
