Optional Accessories - Makita GA037G Betriebsanleitung

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are recommended for use with your Makita tool spec-
ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
• Makita genuine battery and charger
• Wireless unit
► Fig.44
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
-
NOTE: *1 Only for tools with M14 spindle thread.
NOTE: *2 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: *3 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
NOTE: *4 Only for 230 mm cordless angle grinder. (country specific)
NOTE: *5 The Inner flange for the grinder equipped with the brake function when using together with the dust collect-
ing wheel guard.
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.
Wheel guard for depressed center wheel / flap disc / flex wheel / wire wheel brush
Depressed center wheel / Flap disc
Wheel guard for abrasive cut-off wheel / diamond wheel *2
Inner flange *1 / Inner flange 78 (Australia and New Zealand only) *3
Outer flange 78 (Australia and New Zealand only) *3
Side grip for dust collecting wheel guard
Dust collecting wheel guard *4
Dust collecting wheel guard for offset diamond wheel
Side grip
Inner flange *1
Lock nut / Ezynut *1
Back up pad
Flex wheel
Rubber pad
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Abrasive cut-off wheel
Diamond wheel
Special flange *5
Offset diamond wheel
Lock nut wrench
22 ENGLISH