Precautions - auna Silverhammer4 Bedienungsanleitung

EN
Note: If a radio without remote output is installed, connect REMOTE to the accessory power
supply.
26
Power supply
Notes on the power supply
• Connect +12 V only after you have connected all other connections.
• The earthing must be securely connected to the body (metal), otherwise
faults may occur.
• REMOTE must be connected to the remote output on the radio.
• If a radio without remote output is installed, connect REMOTE to the
auxiliary power supply.
• Use a power cable with an integrated fuse (7.5 A 2).
• The fuse must be as close as possible to the battery.
• The +12 V and GND wires must have a diameter value of AWG-10 or a
diameter of 5 mm.

PRECAUTIONS

• The appliance may only be operated on 12 V DC.
• The speakers must have sufficient impedance 2~16 Ω (stereo).
• Never connect active speakers to the amplifier.