Display Items; Repeat And Shuffle Play; Radio; Storing And Receiving Stations - Sony CDC-GT225C Bedienungsanleitung

CD

Display items

Track number/Elapsed playing time,
Disc/artist name, Album number*
Album name, Track name, Text
information*
*1 Album number is displayed only when the album is
changed.
(CDX-GT225C/GT222/GT220 only)
*2 When playing an MP3, ID3 tag is displayed, and
when playing a WMA, WMA tag is displayed.
(CDX-GT225C/GT222/GT220 only)
To change display items, press (DSPL).
Tip
Displayed items may differ depending on model, disc
type, recording format and settings. For details on
MP3/WMA, see page 14.
(CDX-GT225C/GT222/GT220 only)

Repeat and shuffle play

1
During playback, press (3) (REP) or
(4) (SHUF) repeatedly until the
desired setting appears.
Select
TRACK
ALBUM*
SHUF ALBUM*
SHUF DISC
* When an MP3/WMA is played.
(CDX-GT225C/GT222/GT220 only)
To return to normal play mode, select "
or "SHUF OFF."
8
1 ,
2 , Clock
To play
track repeatedly.
album repeatedly.
album in random order.
disc in random order.
OFF"

Radio

Storing and receiving stations

Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1
Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2
Press and hold the select button.
The setup display appears.
3
Press the select button repeatedly
until "BTM" appears.
4
Press (SEEK) +.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.

Storing manually

1
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEMORY" appears.
Note
If you try to store another station on the same number
button, the previously stored station will be replaced.
Tip
When an RDS station is stored, the AF/TA setting is
also stored (page 9).

Receiving the stored stations

1
Select the band, then press a number
button ((1) to (6)).

Tuning automatically

1
Select the band, then press (SEEK) –/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold (SEEK) –/+ to locate the
approximate frequency, then press (SEEK) –/+
repeatedly to fine adjust to the desired frequency
(manual tuning).