IFM Electronic AS interface AC2216 Montageanleitung Seite 15

Operation AC2217
Check the safe functioning of the unit. Display by LEDs:
• LEDs yellow I-1...4 on:
• LEDs yellow I-1...4 flashing: analogue signal outside the measuring
• LEDs yellow I-2...4 out: respective channel is not activated
• LED green PWR on:
• LED green AUX on:
• LED red FAULT on:
• LED red FAULT flashes:
• LED yellow DIAG
DIAG ON
DIAG flashes
DIAG OUT
* Periphery fault
A periphery fault is displayed:
• if at least one of the analogue signals is outside the value range
All manuals and user guides at all-guides.com
respective channel is activated
analogue signal in the measuring range or
no sensor connected (it cannot be differ-
entiated whether the 0 V signal is applied
or whether no sensor is connected)
(channel 1 is always activated)
range (outside range)
AS-i voltage applied
external 24 V voltage applied
AS-i communication error, e.g. slave
address 0
periphery fault*
internal diagnosis
no error
internal error (replace module)
internal error (replace module)
- 15 -