Grouw! 18127 Gebrauchsanweisung Seite 39

Preparation
Connection to tap
Connect a garden hose to the tap and turn
on the water. Turn off the water once the
garden hose is vented and there is an even
jet of water coming out of it.
Connect the garden hose to the hose
coupling (4) on the high-pressure cleaner.
Connecting a suction hose
Check that the � lter on the suction hose (11)
is clean and intact.
Submerge the suction hose in the rainwater
tank or similar from which the water is to be
sucked, and make sure that the suction hose
is completely � lled with water.
Secure the suction hose so that it cannot
be accidentally removed from the rainwater
tank.
Connect the suction hose to the hose
coupling (4) on the high-pressure cleaner.
Fitting the lance or container attachment
If necessary, � ll the container (6) with an eco-
friendly cleaning agent.
Attach the container attachment (7) or lance
(9) to the high-pressure cleaner using the
bayonet socket.
Adjusting the nozzle
Turn the nozzle (8) on the lance (9) to select
one of the six settings:
Angle of distribution
0/15/25/40 degrees
Distribution upwards
Gentle distribution for
watering and cleaning
Fitting the battery
Push the battery (13) into the battery holder
(5) and check that it clicks into place.
Use
Push the safety button (2) in and press the
on/off button (3) to switch the high-pressure
cleaner on. You can then release the safety
button.
Aim the jet at the object that needs to be
cleaned or washed.
Release the on/off button again to turn the
high-pressure cleaner off .
If you have � nished using the high-pressure
cleaner and there is still detergent in the
container, � ll the container with clean water
and turn on the high-pressure cleaner to
rinse it through.
GB
39