Cd-In Connector: Jcd1 - MSI K8N SLI Serie Kurzanleitung

All manuals and user guides at all-guides.com
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that sup-
ports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

CD-In Connector: JCD1

This connector is provided for CD-ROM audio.
Chassis Intrusion Switch Connector: JCI1
This connector is connected to a 2-pin chassis switch. If the
chassis is opened, the switch will be short. The system will record
this status and show a warning message on the screen. To clear
the warning, you must enter the BIOS utility and clear the record.
SATA RAID Connectors: SATA1/SATA2/SATA3/SATA4
TM
The nVIDIA nForce 4 SLI provides a hybrid solution that combines
four independent SATA ports for support of up to four Serial ATA
(Serial ATA RAID) drives and utilizes nVIDIA Serial ATA software
RAID to support RAID levels 0, 1, 0+1, and JBOD f or easy
management of the storage subsystems. These connectors support
nd
2 generation serial ATA data rates of 300 MB/s and are fully
compliant with Serial ATA II specifications.
Serial ATA cable
Connect to SATA1/2/3/4
MSI Reminds You...
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
Connectors
Quick User's Guide
JCD1
R L
GND
2
GND
1
CINTRU
JCI1
GND
RXN TXN
TXP
RXP
GND GND
Take out the dust cover and
connect to the hard disk
devices
E-15