MSI K8N SLI Serie Kurzanleitung Seite 18

MS-7185 ATX Mainboard
The mainboard provides 4 slots for 184-pin DDR DIMM (Double In-Line Memory Module)
modules and supports the memory size up to 4GB. You can install DDR 266/333/400
modules on the DDR DIMM slots (DIMM 1~4).
For the updated supporting memory modules, please visit http://www.msi.com.tw/
program/products/mainboard/mbd/pro_mbd_trp_list.php.
(from left to right)
DIMM Module Combination
Install at least one DIMM module on the slots. Each DIMM slot supports up to a maximum
size of 1GB. Users can install either single- or double-sided modules to meet their
own needs. Users may install memory modules of different type and density on
different-channel DDR DIMMs. However, memory modules of the same type and
density are required while using dual-channel DDR, or instability may happen.
DIMM1 (CH A)
128MB~1GB
128MB~1GB
128MB~1GB
128MB~1GB
MSI Reminds You...
- The system operates ONLY when the DDR modules are installed in
accordance with the above-mentioned memory population rules.
- In dual-channel mode, make sure that you install memory modules
of the same type and density on DDR DIMMs.
- To enable successful system boot-up, always insert the memory
modules into the Channel A slots (DIMM 1 or DIM M3) first.
- This mainboard DO NOT support the memory module installed
with more than 18 pieces of IC (integrated circuit).
- Do not support three memory modules.
E-10
All manuals and user guides at all-guides.com
Memory
DIM M1~DIMM4
DIMM2 (CH B) DIMM3 (CH A) DIMM4 (CH B)
128MB~1GB
128MB~1GB
128MB~1GB
128MB~1GB
128MB~1GB 128MB~1GB
Mode
Single Channel
Single Channel
Single Channel
Dual Channel
128MB~1GB Dual Channel
128MB~1GB Dual Channel