Dab Radio; Station List; Full Scan; Fm Radio - Hama R9054897 Bedienungsanleitung

9. DAB radio

This radio receives all common digital radio frequencies in the range of 174 MHz to 240 MHz (band III,
channels 5A to 13F). The automatic DAB station search starts automatically when DAB mode is started
for the first time. As soon as this has been completed, the current station list is displayed.
Pressing one of the buttons allows you to access the following.

9.1 Station list

The station list offers a complete display of all radio stations that were found during the last complete
search.
Navigate to the desired station you want to call up and confirm this selection. The radio will now start
playing the corresponding station.
For stations that are currently no longer available, a ? appears at the front.

9.2 Full scan

If the location of the radio changes or if new stations can be received, it is advisable to perform the
station search again. The entire frequency range is searched again and the station list is updated.

10. FM radio

• If any of the stations you are looking for is not available on DAB, you can still listen to the station on
FM. To set FM reception, press and hold the
• The FM station setting option appears, which you can operate using the controller. Turning the
controller slowly adjusts the frequency in steps of 0.05 MHz.
Turn the controller faster to adjust the frequency in steps of 0.5 MHz.
• Once you have found the station you want, confirm by the setting by pressing the rotary controller.
• The display shows "FM" in the first line to indicate the reception of FM radio.
The set frequency can also be assigned to a shortcut button (see 10).
• If you wish to adjust the frequency, press the rotary controller (10) again to activate the frequency
setting.
[RADIo] (6) for approx. 5 seconds.
25
DAB RADIo
3s