Herunterladen Inhalt Inhalt Diese Seite drucken

CANGAROO PUDDING Montage- Und Gebrauchsanleitung Seite 11

Kinderhochstuhl
Inhaltsverzeichnis

Werbung

27.When the product is connected to a music player, ensure that the volume of the music player is set to
a low value.
This product is tasted according and meets the requirements the standards EN 16232:2013+А1:2018
and EN 14988: 2017 +A1: 2020
1. Feeding tray
2. Left tube from the frame
3. Front legs
4. Seat pad
5. Control panel
1. To assembly the frame take out the wire from the left t side of the frame and connect the upper part
of the frame to the down part until you hear "click". Insert the back legs to the front part of the frame.
(fig.1)
2. Insert the left and the right tube of the seat into the frame of the chair. Fix until you don't hear "click"
3. Insert the toy bar into the hole and twist to fix. Put the toys as shown on fig. 3
1.
3 recline positions of the backrest. To adjust it push the button on the back side of the backrest and
push up or down.
2.
Adjustable footrest: to adjust the angle press button A and to choose the length use button B
3.
To use as a swing you have to make sure the seat is in the lowest position and to realease the locking
system on both sides.
4.
To fold the swing put the backrest in the upper position and the seat in the lowest position. Press
the folding buttons on both side of the frame in the same time and push the frame together.
ATTENTION ! To avoid serious injuries from falling or sliding out, always use safety belt when using
swing (check figure 7). Safety belts must be in front of the child, not behind it and to be well locked.
OPTION HIGH CHAIR
1. To use the product as a High chair first make sure the
2. Remove the toy bar and insert the feeding tray
3. To adjust the height of the seat press the buttons on both sides of the seat together and choose on of
the 6 levels
4. 3 recline positions of the backrest. To adjust it push the button on the back side of the backrest and
push up or down.
11
PARTS
6. Folding button
7. Right tube of the frame
8. Back legs
9. Toy Bar
10. Adaptor
11. Remote Control
ASSEMBLY
OPTION SWING
FUNCTIILE LEAGANULUI
1. Reglarea spatarului – Spatarul are 3 niveluri de inclinare. Apasati butonul aflat in partea superioara
spate a spatarului si inclinati in pozitia dorita. (fig. 1)
2. Reglarea lungimii si inaltimii suportului pentru picioare - Apasati butonul A de pe suportul pentru
picioare si reglati lungimea suportului pentru picioare pana in pozitia dorita. Apasati butonul B de pe
suportul pentru picioare si reglati inaltimea suportul pentru picioare. (fig. 2)
3. Blocare leaganului - Functia de leganare electrica trebuie oprita, atunci cand se blocheaza. Pentru a
bloca functia de leganare, indepartati sistemele de blocare de pe ambele parti ale cadrului din spate,
dupa care pozitionati cadrul metalic al scaunului in ele. (fig. 3)
4. Plierea leaganului - Pentru a plia leaganul trageti suportul pentru picioare pana in pozitia cea mai
joasa, pliati scaunul/sezutul pana in prima pozitie si apasati butonul cadrului (3) pentru a-l plia. (fig. 4)
ATENȚIE! Pentru a evita rănirea gravă prin cădere sau alunecare, folosiți întotdeauna centura de
siguranță atunci când utilizați leagăn (verificați figura 7). Centurile de siguranță trebuie să fie în fața
copilului, nu în spatele ei și să fie bine încuiate.
ASAMBLAREA SCAUNULUI
1.
1. Reglarea spatarului – Spatarul are 3 niveluri de inclinare. Apasati butonul aflat in partea
superioara spate a spatarului si inclinati in pozitia dorita. (fig. 1)
2.
2. Reglarea lungimii si inaltimii suportului pentru picioare - Apasati butonul A de pe suportul
pentru picioare si reglati lungimea suportului pentru picioare pana in pozitia dorita. Apasati
butonul B de pe suportul pentru picioare si reglati inaltimea suportul pentru picioare. (fig. 2)
3.
3. Blocare leaganului - Functia de leganare electrica trebuie oprita, atunci cand se blocheaza.
Pentru a bloca functia de leganare, indepartati sistemele de blocare de pe ambele parti ale
cadrului din spate, dupa care pozitionati cadrul metalic al scaunului in ele. (fig. 3)
4.
4. Plierea leaganului - Pentru a plia leaganul trageti suportul pentru picioare pana in pozitia cea
mai joasa, pliati scaunul/sezutul pana in prima pozitie si apasati butonul cadrului (3) pentru a-l
plia. (fig. 4)
OPERARE ȘI INSTRUCȚIUNI PENTRU UTILIZAREA FUNCȚIILOR LEAGANULUI:
A. Pornire / oprire
B. Butonul de viteză
C. Buton muzică
D. Indicator luminos de viteză
E. Volum +
MONTAREA SI UTILIZAREA BATERIILOR
1. A nu se lasa bateriile la indemana copiilor! Nu-i lăsați să se joace cu bateriile!
2. Întotdeauna asigurați compartimentul bateriilor cu capac după ce ați introdus bateriile.
3.Nu amestecati diferite tipuri de baterii sau baterii noi cu cele consumate.
F. Temporizator de 3 ori
G. Butonul Natura sună
H. Indicator luminos temporizator
I. Volum -
J. Receptor de semnal telecomandă
K. Buton de mișcare
30

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sg126

Inhaltsverzeichnis