Modster COMPASS Betriebsanleitung Seite 27

Manual - MODSTER Compass
Move bowsie to adjust bended angle of mast. It
should be a little bit bended, but ensure it is a
straight center line between top and bottom of mast.
Move the bowsie at lower position to tighten or
loosen jib sail hypotenuse.
Move bowsie to tighten or loosen jib sail leg.
Move bowsie to adjust distance between jib boom
and deck.
www.modster.at
Move bowsie to tighten or loosen main sail leg.
Move bowsie to adjust bended angle of mast.
It should be bended like a bow as dotted line
shown in picture, but ensure it is a straight center
line between top and bottom of mast.
Loosen the screw and move the arm on main
boom to adjust height of main boom (only
needed when the cord tied on SR1 is not perfect)
27