Plantronics Savi 430 Kurzanleitung Seite 3

USB adapter (D100)
Charging Charger base
indicator light
Volume up button
Volume down button
(also controls mute)
Headset with pre-installed eartip
Extra eartips
4
Subscription button
Indicator light
Base power supply
USB charging cable
Call control button
Indicator light
Microphone
1 Connecting USB adapter to PC
1-1. Insert the USB adapter into the USB port on the PC. The indicator light on the USB
adapter will be solid red to indicate the USB adapter is powered on and will turn solid green
when it finds the headset.
1-2. The adapter can be folded as shown.
NOTE
The headset may need to be charged before the USB adapter can find it.
IMPORTANT NOTE It is recommended that Windows be updated with Service Pack levels listed
below:
Microsoft Windows XP Service Pack 3 (SP3) or later
Microsoft Windows Vista Service Pack 1 (SP1) or later
2 Connecting power supply to charger base
2-1. Connect the base power supply into the power jack on the charger base.
2-2. Connect the power supply to the outlet. The charging indicator light will be solid green.
3 Docking and charging headset
3-1. Gently push the headset into the charge cradle.
The charging indicator light on the charger base will flash
green to indicate that the headset battery is charging.
3-2. Charge for at least 20 minutes prior to the
first use. A full charge takes 3 hours.
NOTE The USB charging cable can also be used to charge the headset. To successfully charge
your headset with the USB cable the PC must be on and in an active state (not standby). The
charging time will vary according to the number of other devices drawing power from the PC's USB
port(s).
NOTE The product has a non-replaceable battery. Contact Plantronics for replacement information.
CHARGING TIME
20 min .....................
Minimum charge
before first use
3 hours ...................
Full charge
5