Technical Parameters - auna multimedia 10006448 Bedienungsanleitung

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

Tuner Part:

Frequency Range

Intermediate frequency

Signal to noise ratio (S/N)

Play Part:

Signal to noise ratio (S/N)

Channel Separation (1 KHZ)

Voltage Harmonic Distortion

Frequency Response

Amplifier Part:

Output

Speaker Impedance

Power source

Car battery (the negative pole connect ground, see on the unit in detail)

CAUTIONS

When replacing the fuse, please check that the fuse is of the same specification.

1. Before install the main unit, please place the main unit at desired position, connect the speaker wire

and power wire for test use.

2. After the working effect of the main unit is ideal, fix the main unit.

1. Install the support on the instrument panel of the car, bend the clamp of the support.

2. Connect the power wire and speaker wire, fix the fixing piece in the car.

3. Insert the antenna plug, push the main unit into the support, and tighten the fixing nut of the fixing

piece.

Insert two disassembly keys into the left and right gap, make the keys hook the main unit, pull out it

to remove the main unit from the support, then disassemble the connection wire and unplug the

antenna plug.

All manuals and user guides at all-guides.com