Firmware-Update; Update Via Usb Device; Update Via The Smartphone Or Tablet - Megasat Caravanman 65 Premium V2 Bedienungsanleitung

9. Firmware-Update

From time to time it may be necessary to update the firmware of the control unit (e.g.
in case of a frequency change of the satellite operator or a general improvement of the
control unit).
The current firmware can be found on our homepage www.megasat.tv

9.1 Update via USB device

9.2 Update via Smartphone or Tablet
When frequency changes are made by the satellite operators, the app will be updated
automatically. A notice will appear in the app that you should update the antenna.
Make sure you have Bluetooth® enabled on the mobile device and the antenna is
connected to the mobile device.
Then follow the instructions in the app.
20
1. Copy the firmware file to a suitable USB stick.
The USB stick should be formatted to FAT32 and
should not contain any other files.
2. Make sure that the control unit is turned off at
the main switch.
3. Insert the USB stick with the new firmware into
the USB port on the front panel.
4. Now switch on the control unit. The control unit
boots and starts the update process automati-
cally. IMPORTANT: Do not switch off the control
unit during the update process to avoid possib-
le damage!
5. After a successful update, the control unit swit-
ches off and restarts automatically. The update
process is now finished.
ENGLISH