Connection Of The Connecting Cables - Megasat Caravanman 65 Premium V2 Bedienungsanleitung

3. Mounting and installation
3.4 Connecting the connecting cables
Connections on the roof:
1. Connect the LNB cable (No. 1) and the LNB cable (No. 2) to the F connector.
2. Connect the control cable (No. 3) and the control cable (No. 4).
3. Carefully slide both cables through the openings in the roof bushing.
4. If both cables are inside the roof bushing, tighten the cable gland.
Connections inside the vehicle:
1. Connect the LNB cable (No. 2) to the LNB input (No. 5) on the control unit.
2. Connect the „shorter" LNB cable to the receiver or TV.
3. Connect the control unit to the input (No. 6) on the control unit.
4. Connect the control cable to the input (No. 7) on the control unit.
5. Connect the power supply of the vehicle to the control unit (No. 8).
Connecting the power supply:
–
+
Fuse
vehicle battery
12~24 volts DC
(red cable)
Ground Ignition plus
(black cable) (blue cable)
ENGLISH
09