3. Mounting and installation
3.3 Mounting the roof outlet
If there is no existing roof lead-through that can be used, look for a suitable place (pre-
ferably in the slipstream behind the antenna) on the vehicle roof. Make sure that water
and moisture (e.g. rain or splash water) do not penetrate the borehole. Make sure that
the cables are not bent too much to avoid signal loss and damage to the cable (smallest
bending radius max. 5-7 cm).
Control cable
(coming from the antenna)
Cable gland
3
1
LNB cable
(coming from the antenna)
5
08
Control cable
(coming from the control unit)
Gasket
F-connector
LNB-Kabel
(coming from the control unit)
ENGLISH
4
2
6
7
8