Herunterladen Inhalt Inhalt Diese Seite drucken

Battery Recycling - Panasonic EY4550 Bedienungsanleitung

Kabellose stichsäge
Vorschau ausblenden Andere Handbücher für EY4550:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 24
Battery Pack Life
The rechargeable batteries have a
limited life. If the operation time
becomes
extremely
recharging, replace the battery pack
with a new one.

Battery Recycling

ATTENTION:
For environmental protection and
recycling of materials, be sure that
it is disposed of at an officially
assigned location, if there is one in
your country.
[Battery Charger]
Charging
Cautions
• If the temperature of the battery pack
falls approximately below −10°C
(14°F), charging will automatically
stop to prevent degradation of the
battery.
• The ambient temperature range is
between 0°C (32°F) and 40°C (104°F).
If the battery pack is used when the
battery temperature is below 0°C (32°F),
the tool may fail to function properly.
• When charging a cool battery pack
(below 0°C (32°F)) in a warm place,
leave the battery pack at the place
and wait for more than one hour to
warm up the battery to the level of the
ambient temperature.
• Cool
down
the
charging more than two battery packs
consecutively.
• Do not insert your fingers into contact
hole, when holding charger or any
other occasions.
To prevent the risk of fire or
damage to the battery charger.
• Do not use power source from an
engine generator.
• Do not cover vent holes on the
charger and the battery pack.
All manuals and user guides at all-guides.com
Li-ion Battery Pack
short
after
Battery charger
1. Plug the charger into the AC outlet.
2. Insert the battery pack firmly into the
3. During charging, the charging lamp
charger
when
4. The charge lamp (green) will flash
5 When charging is completed, the
6. If the temperature of the battery pack
- 18 -
• Unplug the charger when not in use.
NOTE:
Your battery pack is not fully charged
at the time of purchase. Be sure to
charge the battery before use.
charger.
1. Line up the alignment marks and
place the battery onto the dock on
the charger.
2. Slide forward in the direction of the
arrow.
Alignment marks
will be lit.
When charging is completed, an
internal
electronic
automatically be triggered to prevent
overcharging.
• Charging will not start if the battery
pack
is
warm
(for
immediately
after
operation).
The orange standby lamp will be
flashing until the battery cools down.
Charging
will
automatically.
slowly
once
the
approximately 80% charged.
charging lamp in green color will
turn off.
is 0°C or less, charging takes longer
to fully charge the battery pack than
the standard charging time.
Even when the battery is fully charged,
it will have approximately 50% of the
power of a fully charged battery at
switch
will
example,
heavy-duty
then
begin
battery
is

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis