EMPHASER EM-MBSUBR Einbau & Bedienungsanleitung Seite 5

2
Finally, loosen the three screws of the woofer. To unlock the speaker connector, use a small
flat-head screwdriver or a paper clip.
Remove the rear part including insulation wool from the original woofer and mount it at the
same place on the EMPHASER subwoofer.
All manuals and user guides at all-guides.com
8
3
Install the Emphaser speaker in the vehicle. Plug in the low-pass crossover supplied with
the set and store it underneath the woofer. If necessary, wrap the switch in a cloth or fix it
firmly to prevent rattling noises.
Assemble the vehicle in reverse order.
9