Standard Spare Parts; Accessories - Viking MI 632 Gebrauchsanleitung

● Disconnect the power supply unit plug
from the mains
● Remove the docking station cover
( 9.5)
Disconnect the perimeter wire (1). Open
the cover of the cable duct (2) and guide
the perimeter wire together with the press-
fit connectors out of the docking station
socket.
Do not remove the press-fit
connectors from the perimeter wire;
they are intended for one-time use.
Additional press-fit connectors are
available from a VIKING specialist
dealer. ( 16.)
Do not remove the perimeter wire
from the mowing area.
● Disconnect the power cable from the
docking station.
● Install the docking station cover.
( 9.5)
● Remove the docking station.
● Protect the terminals (connectors) of
the perimeter wire from environmental
influences (e.g. wrap with suitable
insulating tape).
0478 131 9920 C - EN
All manuals and user guides at all-guides.com
● Carefully clean all external parts of the
robotic mower and the docking station.
● Store the robotic mower together with
the docking station and the power
supply unit in the normal position and in
a dry and locked place that is generally
free of dust. Dock the robotic mower in
the docking station. Make sure that the
machine is kept out of the reach of
children.
● Always store the robotic mower in good
operational condition.
● Keep all screws tightly fastened,
replace danger signs and warnings on
the machine that have become illegible,
check the entire machine for wear and
damage. Replace all worn or damaged
parts.
● Any machine faults must be completely
remedied prior to storage.
Never place or store objects on the
robotic mower or on the docking
station.
Resuming operation of the robotic mower
following prolonged immobilisation:
● Prepare the mowing area:
Remove foreign objects and cut high
grass short using a conventional lawn
mower.
● Install the docking station (
connect the perimeter wire. (
● Charge the battery (
● Check the time and date and set if
necessary ( 10.10)
● Check the mowing plan and change as
necessary. ( 10.5)
● Switch on automatic mowing (

16. Standard spare parts

Mowing blade:
6309 702 0100
Battery AAI 130 (MI 632):
6309 400 6510
Battery AAI 200 (MI 632 P):
6309 400 6500
Fixing pins AFN 051:
6309 007 1000
Perimeter wire ARB 150:
0000 400 8610
Wire connector ADV 010:
6909 007 1090
Press-fit connector AKS 010:
6909 007 1095

17. Accessories

Additional accessories are available for
the machine.
Further information is available from your
VIKING specialist dealer, on the internet
(www.viking-garden.com) or in the
VIKING catalogue.
For safety reasons, only
accessories approved by VIKING
9.5) and
may be used with the machine.
9.7)
14.8)
10.4)
123