Quax MINI MEZZANINE 0101Q00 Serie Bauanleitung Seite 23

4. Assembling the box
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T
MINI MEZZANINE 0101Q00x
T 0032 9 380 80 95
Step 4.1 : Use the front EB1 and six connectors
A
Tighten the connectors (A) in the drillings on the
inside of the panel (EB1).
The box front is now code AB1.
Step 4.2 : Use the back EB3, two
connectors A, four minifi x B and
four wooden dowels C
Tighten the connectors (A) in the
drillings at the bottom of the inside
of the panel (EB3). Push the minifi x
(B) into the holes on the outside of
the back. Push the wooden dowels
(C) into the drillings on the sides of
the back.
The back is now code AB2.
23
Step 4.3 : Use both sides
EB2-L and EB2-R, eight
connectors A, four minifi x
B and four wooden dow-
els C
Tighten the connectors
(A) in the drillings on the
inside of the sides (EB2-
L and EB2-R). Push the
minifi x (B) into the holes
on an outside of the sides.
Push the wooden dowels
(C) into the holes on one
side of the panel.
The sides are now codes
AB3-L and AB3-R.
www.quax.eu - E E info@quax.eu