Please
note:
Where
possible,
avoid
having the temperature setting on super
cooling or 2°C all of the time. This will
help
to
alleviate
strain
on
the
compressor
and
refrigeration
system.
Press the
for 15s,
key flickering,
then access to the laboratory adjustable
state
The lamp replacement operation
instructions are as follows:
Replace the lights
(lamp parameter: 12V/5W)
1, Unplug the power plug.
2, Remove the top light cover
with a screwdriver, then replace the new
LED light board.
3, Use the screwdriver install the light
cover back to original place,
14