Foreword; Safety Instructions And Precautions; Risk Of Electric Shock - Kindermann Aktivbox2 Set50 W Montage- Und Bedienungsanleitung

1. Foreword

Before using the product, read this manual carefully. The images shown in this manual are for reference only and may
differ from the actual product. This manual is for reference only. Contact your local dealer for maintenance assistance.
In a constant effort to improve the product, we reserve the right to change functions or parameters without prior notice
or obligation. For the latest information, please contact your local Kindermann dealer.
2.

Safety Instructions and precautions

• Read the operating instructions carefully and keep them in a safe place.
• Carefully unpack the unit and save the original packaging and packing materials for possible future shipment.
• Follow basic safety precautions to reduce the risk of fire, reduce electric shock and injury to persons.
• Make sure that nobody steps on the power cord and that it is not crushed, especially at plugs and sockets.
• Never open or modify the unit. This may result in electric shock or burns.
• Only use the additional devices/accessories specified by the manufacturer.
• The use of consumables or parts that do not meet the product specifications may result in damage
or malfunction.
• Clean the speakers only with a dry cloth.
• Refer all servicing to qualified service personnel.
• Turning off the POWER switch stops all functions and the indicators of the amplifier go out.
However, the device is only completely disconnected from the mains by pulling out the mains plug.
Therefore, the mains plug and socket must be easily accessible.
• The system should only be stored and used in a dry environment.
• Place the unit in a well-ventilated location to prevent damage from overheating.
• Notes on the disposal of old equipment: The device may not be disposed of with the household waste,
but must be returned via trade channels.
• Make sure that all components and accessories are included before installation.
• All power switches, plugs, sockets and power cords must be insulated, grounded and secure.
• All equipment should be connected before switching on.
Note: The terminals marked with the symbol "
The external wiring connected to the terminals must be installed by qualified personnel or with
pre-assembled cables.
14
WARNING

Risk of electric shock

non-isolated "dangerous voltage"
inside the product housing!
↯
" may present a risk of electric shock!