Detectalia V800 Bedienungsanleitung Seite 14

5.5 Set time
In the MENU choose SET TIME (pic 5-5), then press CUR or ADD to increase number and FACE or
BATCH to decrease number.
Press START | ENTER or START || ENTER and to move to the next setting till the display shows
"set ok" after setting, once finished press ORIENT or +1/+10 to back to the previous interface.
5.6 Update
In the MENU choose UPDATE (pic 5-6). Press CUR or ADD and FACE or BATCH to make a
selection, then press START | ENTER or START || ENTER to confirm (then the display will show
"receive OK", which means the upgrade is finished. Then press ORIENT or +1/+10 to back to the
previous interface Note: before update, please insert the SD card (with new software) into the SD
card slot, and also should make sure that it shows "SD OK".
5.6.0 CIS update
Please copy the software in the USB drive, then insert the USB drive to the CIS/Main program upgrade USB port. At last, turn on the machine, then the
machine will update the software automatically.
5.6.1 DB Update (display software update)
Insert the SD card (with the software), and pres START | ENTER or START || ENTER to enter into the software upgrade interface, then wait for the updating
finished.
5.6.2 PIC LOGO (picture/logo update)
Insert the SD card(with the software), and press to enter into the software upgrade interface, then wait for the updating finished.
14
V800
Pic 5-5
Pic 5-6