Detectalia V800 Bedienungsanleitung Seite 10

4.2 The introduction of the buttons
Press this button to select the User 1.
START
Press this button to save and exit the setting.
|
In the MENU interface, press this button to confirm.
REPORT
Press this button to move to the next selection.
Press this button to enter into the report interface. (the
first press is to check the total report, the second press
REPORT
is to check the detailed report).
Press this button to print out the current report.
PRINT
Press this button to enter into the MENU Interface.
MENU
Press this button to turn on/off the accumulation function.
ADD
When do some setting, press this button to increase "1".
10
Press this button can turn on/off the batch function, and if press
again, the user can select the batching number among "100, 50,
20, 10, off".
BATCH
If the batching number area shows "---", which means the batch
function is"off".
When do some setting, press this button to decrease "1".
In the batching mode, short press this button is to increase "1";
if long press this button is to increase"10".
+1/+10
In the MENU interface press this button to return to the
previous interface.
Press this button to select different currency.
CUR In the Menu Interface, press this button to select the next choice.
When do some setting, press this button to increase "1".
Press this button to active FACE function.
FACE
When do some setting, press this button to decrease "1".
Press this button to active ORIENT function.
ORIENT In the MENU interface press this button to return to the pre-
vious interface.
Press this button to select the User 2
START
Press this button to save and exit the setting.
||
In the MENU interface, press this button to confirm.
ENTER
Press this button to move to the next selection.
In the Main screen, press this button to select the counting
mode. There are five counting modes: COUNT, FACE, ORIENT,
MODE
SINGLE, MIX.
Press this button to check the information of the suspicious notes.
REJECT