AsViva EKC5 Betriebsanleitung Seite 34

ASSEMBLY
ATTACH THE REAR AXLE
2
1. Turn the vehicle body upside down.
2. Remove all parts from the rear axle.
3. Cut off the plastic tie on the front axle with scissors.
4. Insert the rear axle through the hole in the transmission housing and through the hole at the rear of the
vehicle
5. When inserting halfway, lift the other gear housing so that the rear axle can be guided through and protrude.
6. Make sure that the rear axle is centered and that the left and right ends protrude outside the vehicle body by
the same distance.
34