Technical Data; Safety Instructions; General Power Tool Safety Warnings - AL-KO HT 700 FLEXIBLE CUT Gebrauchsanleitung

All manuals and user guides at all-guides.com

Technical data

Technical data
Power consumption
Blade length
Cutting thickness
Total weight
Vibrations measured at hand grip*
Mains voltage
Insulation class
Stroke rate at no load
Noise level L
PA
* The declared vibration total value has been measured in accordance with a standard test method and may be
used for comparing one tool with another.

Safety instructions

General Power Tool Safety Warnings

Warning!
The vibration emission during actual use of
the power tool can differ from the declared
total value depending on the ways in which
the tool is used..
Caution!
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fi re and/
or serious injury.
Save all warnings and instructions for future
reference.
14
AL-KO Hedge trimmer
HT 600 Flexible Cut HT 700 Flexible Cut
600 W 700 W
600 mm 650 mm
24 mm 24 mm
4.1 kg 4.5 kg
4.8 m/s² 4.1 m/s²
230 V ~ 240 V / 230 V ~ 240 V /
50 Hz 50 Hz
/ II / II
-1
1,700 min 1,700 min
90 dB (A) 94 dB (A)
Caution - Risk of injury!
Safety/protection devices should not be
disabled!
Caution - Danger of electrocution!
If the cable has been cut or is damaged,
disconnect the plug from the mains supply
immediately.
Caution!
Use the equipment only if it is in correct
operating condition! Before using, check
the machine, cable and plug for damage;
any damaged parts must be repaired or
replaced at a specialised repair centre.
Translation of original user instructions
-1