Setting Alarms And Timers - Camry Premium CR 1179 Bedienungsanweisung

(7) button to confirm to 'High', 'Medium' or 'Low'.
6.2. Language – The language used for display messages can be selected from below options: English | Francais Under the system menu,
press the Next/ Previous(3,4) button to select "Language" through the list of menu, Push the SELECT(7) button to confirm. Cycle
through the Language menu by press the Next/ Previous (3,4) button, select and stop at a particular language, Push the SELECT (7)
button to confirm.
6.3. Factory Reset – This function clears all user-defined settings, replacing them with the original default values, so time/date,
preferences/settings, DAB station list, and preset stations are all lost. Under the system menu, press the Next/ Previous(3,4) button to
select "Factory Reset" through the list of menu, Push the SELECT(7) button to confirm to. Then, use the Next/ Previous(3,4) button to
choose <Yes> and Push the SELECT(7) button to start the factory reset.
6.4. Software version – this is used to display the current software version.
Under the system menu, press the Next/ Previous button to select "Software version" through the list of menu, Push the SELECT button to
confirm. Then, the existing SW version will be showed.
FM mode – choosing menu options
1. If the DAB Digital Radio is in FM mode, press and holds the MENU/ INFO(8) button to enter the menu list too. Press the Next/
Previous(3,4) button to select the option through the list of menu. Then, stop at your preferred option and Push the SELECT(7) button
to confirm. The menu options are scan setting, audio setting, system.
2. Scan setting – by default, FM scans stop at any available station (All stations). This may result in poor quality audio from weak stations.
Options: Strong stations only / All stations Under menu list, press the Next/ Previous(3,4) button to select a particular option in "Scan
setting", then Push the SELECT(7) button to confirm the change to the new setting.
3. Audio setting – by default, all stereo stations are reproduced in stereo. For weak stations, this may result in poor quality audio. The audio
quality can be improved using mono. Options: Stereo allowed | Forced mono Under menu list, press the Next/ Previous(3,4) button to
select a particular option in "Audio setting" then Push the SELECT(7) button to confirm the change to the new setting. It will
automatically change to a new setting after 3 seconds.
PRESET button
Preset 20 DAB stations and 20 FM favorite stations
1. Store a station to the preset list – to store a station, selected your desired radio station, then press and hold the PRESET(2) button for a
second until the LCD display "Preset store #:(Empty)", or"#: saved radio station".
2. Either press the Next/ Previous(3,4) button to select your desired station preset number, Push on the SELECT(7) button to confirm your
selection, the display will show "Preset # Stored".
Recall a station from the Preset list
1. To recall a preset station, press the "PRESET" button once, either rotate the Next/ Previous(3,4) button to select presets station that you
have stored. When the display shows your desired preset number, Push SELECT (7) button to confirm.
Note: If you choose a preset that hasn't been allocated a station, then "Empty" will be displayed.
Next/ Previous button
Choosing radio stations or options
1. If the DAB Digital Radio is in DAB mode, press the Next/ Previous(3,4) button to cycle through the radio station list when you are
listening. Or press the Next/ Previous(3,4) button to cycle through the menu list for options.
2. If the DAB Digital Radio is in FM mode, press the Next/ Previous(3,4) button to manually adjust the frequency by 0.05MHz. Or you can
press and hold TU+/-(3,4) button to auto-scan station. Or press the Next/ Previous(3,4) button to cycle through the menu list for
options.
VOLUME +/- button
adjusting volume
Turn the Volume dial to increase or decrease the volume.

SETTING ALARMS AND TIMERS

You can set two alarms, which can tune to a radio station or sound atone.
Note: Alarms only sound when is switched on or in standby mode, and connected to a power supply.
Alarms do not sound when is switched off.
Setting an alarm
1. Press hold the Menu Button(8) for 2 seconds to view the main menu.
2. Turn and press the Next/ Previous(3,4) button to select 'System ' > 'alarm'.
3. Press the Select(7) button to change the 'Alarm 1 wizard '
4. Pressing the Next/ Previous(3,4) Button to adjust the hours and minutes, press Select(7) to confirm each section.
5. Press the Select button select 'Source'.
6. Press the Next/ Previous(3,4) button to select Buzzer', 'FM' or 'DAB', then press the Select(7) Button to confirm.
7. If you've chosen 'Digital Radio' or 'FM' radio, Press the Next/ Previous(3,4) button to select 'Preset'(2). To play the station you last
listened to, turn and press the Select dial to select 'Last listened' or turn and press the Next/ Previous(3,4) button to choose a radio
station from the preset list.
Note: Skip this step if you are setting a Tone alarm.
8. Press the Next/ Previous(3,4) button to select 'Daily'.'once'.'weekends'or 'weekdays'. then press the Select(7) Button to confirm.
9. Press the Next/ Previous(3,4) button select 'Volume'. Press the Select(7) Button to confirm.
10. Turn and press Select(7) to turn 'Alarm' to 'On'.
11. Turn and press Select(7) to turn 'Alarm saved'.
All manuals and user guides at all-guides.com
5