Disassembling The Old Thermostat Head; Installing The New Thermostat Head - Silvercrest 368308 2010 Bedienungsanleitung

Disassembling the Old Thermostat
Head
1� Set the thermostat head (12) to its highest set-
ting (11)�
This means the thermostat head (12) is no longer
pressing on the valve pin of the radiator and can
be removed more easily�
2� Unscrew the fixing element (10) of the thermo-
stat head (12) using an appropriate tool and re-
move the thermostat head�

Installing the New Thermostat Head

To fit the device to Danfoss radiator valves, you
need the adapter (14) provided� To determine
which adapter (14) fits which radiator valve, please
refer to Fig� B - D on the fold-out page�
Caution! Risk of trapping be-
tween the halves of the adapter!
▸ During assembly, be careful not to
jam your fingers between the halves
of the adapter!
Caution! Risk of cuts! The
adapters and stem extension
supplied could have sharp edges�
▸ Smoothen any burrs at the breakout
points of the adapter used with the
aid of an appropriate tool�
46
Gi