Herunterladen Inhalt Inhalt Diese Seite drucken

RCS FMX-1402 R Bedienungsanleitung Seite 13

Inhaltsverzeichnis

Werbung

PROFESSIONAL AUDIO MIXER
any tape or disc recording device.
22. Tape Level
You can adjust the incoming level of your intermission en-
tertainment, independent of the main mix level controls via
this feature.
23. Tape to Main Mix
This switch actually routes the tape playback signal into the
main L/R mix circuits, before the bus insert jacks and the
main mix fader.
24. Monitor Output
To create a stage monitor mix with levels set independently
from the main mix, patch these _" phone jacks into your mo-
nitor amplifier inputs.
25. Utility Output Level
The stereo signal at these _" phone jacks is the same as
the main out, with one important difference: After the main
mix fader, the mix is sent through the utility out level control
allowing you to set levels as desired without disturbing the
main mix level.
26. Digital Effect Foot Switch
You can connect a foot switch to this jack to duplicate the
function of the DSP switch.
27. Headphone Output
Connect stereo headphones here for channel monitoring.
28. Headphone Output Level
Sets the output level to the headphone output jack.
All manuals and user guides at all-guides.com
Disc-Aufnahmegeräte über unsymmetrische Cinchbuchsen.
22. Tape Level
Hiermit können Sie den über Tape In eingehenden Pegel, un-
abhängig vom Pegel des Main Mix, einstellen.
23. Tape to Main Mix
Dieser Schalter leitet das Tape Wiedergabesignal zum Main
Mix L/R, vor den Bus Insert-Buchsen und dem Main Mix-
Fader.
24. Monitor Ausgang
Verbinden Sie diese 6,3 mm Klinkenausgänge mit den Ein-
gängen Ihres Monitor-Verstärkers, um einen Bühnen-Moni-
tor-Mix mit vom Main Mix unabhängigen Pegeln zu schaffen.
25. Utility Output Level
Das an diesen 6,3 mm Klinkenausgängen anliegende Stereo-
signal ist identisch mit dem Main-Ausgangssignal, bis auf ei-
nen wichtigen Unterschied: Nach dem Main Mix-Fader wird
der Mix durch den Levelregler des Utility Outputs geschickt
und ermöglicht es Ihnen somit, den gewünschten Pegel ein-
zustellen, ohne den Pegel des Main Mix zu verändern.
26. Fußschalter für Digital Effect
Hier kann ein Fußschalter angesteckt werden, der die Schal-
tung des DSP ermöglicht.
27. Ausgang Kopfhörer
Für den Anschluss eines Stereo-Kopfhörers zum Abhören
der Kanäle.
28. Ausgangspegel Kopfhörer
Regelt den Ausgangspegel für den Kopfhörer-Ausgang.
13

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fmx-2002

Inhaltsverzeichnis