Zwilling FRESH & SAVE Bedienungsanleitung Seite 37

Use
at the charging station. Insert the larger USB
connector (USB 2.0) into a power adapter
and plug it into a wall socket.
You can also connect the charging cable to
the USB port of a computer. During charging,
"
Vacuum sealing boxes and bags
!
The pump must not absorb any liquids
(e.g. water, oil, meat juices). If you see
that the pump is sucking in liquids, imme-
diately stop the vacuum sealing process
by pressing the On/Off button.
www.zwilling.com
the indicator light will flash slowly. When the
pump is fully charged, the indicator light will
continuously glow. Depending on the power
source charging may take 2 to 5 hours.
Place the vacuum pump on the valve of the
box and, if necessary press down lightly. Press
the On/Off button on the pump.
The pump sucks the air out of the box. The
vacuum sealing stops automatically when
GB
37