Handling Instructions - Wellis Clement WF00110 Bedienungsanleitung

EN
Adjusting the amount of water in the tank:
1. Push the peg off.
2. Release the bayonet catch by unscrewing the valve body.
3. Adjust the desired amount of water (litres) according to the scale by moving the
valve body up/down.
4. Lock the bayonet catch again (slight click) by twisting the valve body in the opposite
direction.
5. Push the mounting pin back in until it snaps back into place properly.
1.

Handling instructions

Do not use abrasive or scouring cleaners to clean the toilet bowl and seat as they can
scratch and scrape the toilet bowl and seat. Do not use cleaning agents containing
chlorine as they can seriously damage the assembly elements. Use warm water or
liquid detergent to clean the surface and wipe it dry with a soft cloth.
2.
3.
4.
5.