Wellis Clement WF00110 Bedienungsanleitung Seite 4

EN
3. Place the tank on the toilet bowl
so that the sealing ring is accurately
positioned as well.
Tighten the screws thoroughly so that the
tank is level.
Sealing
5. Connect the water connection pipe to the angle valve and check for leaks. Then turn
off the angle valve and disconnect the connection pipe. Close the unused inlet opening
with the supplied plug.
Fixing screw
Toilet bowl inlet
4. Connect the water connection pipe to
the tank and pull it through the suitable
opening on the corresponding side for the
toilet bowl.
Cover plug
Side connection
openings
Water connection pipe
(Not included)