Commissioning The Heater - ensto BETA-BT Serie Installations- Und Bedienungsanleitung

4. LED indicators
LED indicator C
LED indicator B
LED indicators C
and B

5. Commissioning the Heater

• Use the power switch (A) to switch the heater on (position I) and off (position 0).
• Adjust the desired temperature with the adjustment knob (D).
6. Calibrating the Adjustment Knob, figure 4
• Check the temperature after approximately 24 hours. If the temperature does not match the set value,
calibrate the adjustment knob on the thermostat.
• Remove the adjustment knob.
• Put the knob on the toothing in such a manner, that the knob indicates the actual temperature.
• Set the desired temperature with the adjustment knob.
7. User Instructions for Ensto Heat Control Application
With this application you can program and change the settings of your heater. Bluetooth technology is used for
the wireless connection. You can connect to one device at a time. The range in free space is approximately 5m.
7.1. Commissioning the application
• Download the Ensto Heat Control application from Apple Store or Google Play, figure 6.1.
Note! Pair your mobile device and heater only via the Ensto Heat Control application. DO NOT pair the
heater using the device's own Bluetooth menu. If you have paired the heater from the mobile device's own
Bluetooth menu, the application is not able to contact the heater. To correct the situation first remove the
heater from the mobile device's own Bluetooth menu and then pair it via the application. When paired via
application the connection works. The heater also appears in the mobile device's own Bluetooth menu.
When pairing allow the Ensto Heat Control application to use the location service, if the application re-
quests it. It depends on the mobile device, if the application needs permission to use the location service
from the mobile device itself in order to use the Bluetooth low energy radio on the mobile device. If you do
not give the permission, the application is not able to use the Bluetooth low energy radio and the applica-
tion is not able to connect to the heater. The Ensto Heat Control does not collect user's location information
and does not need the location service itself, but the application requires the Bluetooth low energy radio
for wireless data transfer between the application and the heater.
• Open the application. In "DEMO" mode you can practice using the application. The Tutorial video shows ap-
plication's features and guides you through the commissioning. At any time, you can go back to the Tutorial
through the "Support" menu.
• After the Tutorial, pair your mobile device with your heater, figure 6.2.
» Switch on the heater with the power switch (A).
» Remove the adjustment knob (D).
» Press the Bluetooth button (E) on the heater for 1 second.
» The blue LED indicator (B) blinks.
12 / 72
Green: thermostat is on, heating is off
Red: heating is on
Blue blinking: pairing is ongoing
Blue blinking quickly: factory defaults are resetting
Blue: temperature change
Red and blue blinking alternately:
faulty sensor
RAK124 / 6.5.2021