Inhaltsverzeichnis
Werbung
Control Panel, figure 3
A
Power switch
B
Blue LED indicator
C
Red / Green LED indicator
D
Adjustment knob
E
Pairing the heater with mobile device / Factory reset
Commissioning the Heater
•
Use the power switch (A) to switch the heater on (position I) and off (position 0).
•
Adjust the desired temperature with the adjustment knob (D).
Calibrating the Adjustment Knob, figure 4
•
Check the temperature after approximately 24 hours. If the temperature does not match the set value,
calibrate the adjustment knob on the thermostat.
•
Remove the adjustment knob.
•
Put the knob on the toothing in such a manner, that the knob indicates the actual temperature.
•
Set the desired temperature with the adjustment knob.
User Instructions for Ensto Heat Control Application
With this application you can program and change the settings of your heater. Bluetooth technology is used for
the wireless connection. You can connect to one device at a time. The range in free space is approximately 5m.
Commissioning
•
Download the Ensto Heat Control application from Apple Store or Google Play, figure 6.1.
•
Open the application. In "DEMO" mode you can practice using the application. The Tutorial video shows ap-
plication's features and guides you through the commissioning. At any time, you can go back to the Tutorial
through the "Support" menu.
•
After the Tutorial, pair your mobile device with your heater, figure 6.2.
»
Switch on the heater with the power switch (A).
»
Remove the adjustment knob (D).
»
Press the Bluetooth button (E) on the heater for 1 second.
»
The blue LED indicator (B) blinks.
When the application has found your heater, you can see the default name "New heater" on your
»
mobile display.
Press the "New heater" button within 45 seconds.
»
»
The blue LED indicator (B) turns off, when the pairing is completed or 45 seconds is exceeded.
»
Put the adjustment knob (D) in place.
Now you can find your heater in "Devices / My devices".
•
Temperature Change with Calendar, Boost and Vacation
•
With this application you can change the setting temperature adjusted with the adjustment knob (D) on
the heater.
•
The change may be either a rise or a drop in temperature.
•
The blue LED indicator (B) is on when the temperature change is in use.
•
Press the
button on home display to enter the editing mode.
•
"Calendar" is intended for weekly reoccuring events. For example, on weekdays you can drop the tempera-
ture overnight, as well as when you are away from the building. Note! When making settings for overnight,
the night must be in two sections.
•
"Boost" is intended for a temporary temperature change. For example, after a shower you can raise the
temperature in the bathroom, so that the floor will dry faster.
•
"Vacation" is intended for long-term changes in temperature, e.g for a weekend break or an annual holi-
day.
RAK124 / © Ensto 2019
11
Werbung
Inhaltsverzeichnis
