Installation
PrimuX PCI / PCI Express controller
In order to install your PrimuX PCI / PCI Express controllers you need an available PCI resp. PCI
Express slot. The PrimuX PCI controllers are universal and can be used in 3.3V and 5V PCI slots.
Be aware though that the PrimuX S2M controllers need a 3.3V power supply on the PCI slot
which on older mainboards may not be available.
Turn off your PC, unplug the power cord and open the housing.
Select an available PCI resp. PCI Express slot and remove the corresponding slot cover from the
housing.
Installation
37