Remote Control - Pelgrim ISW0930 Serie Bedienungsanleitung

USE

Remote control

Operation
EN 6
Pairing the remote control with the appliance
If the appliance cannot be operated with the remote control, for
example if the battery has been changed recently, the remote control
must be paired with the appliance again.
1. Touch and hold the '+' key.
2. Connect the appliance to the mains voltage.
▷ A long beep sounds. The remote control is paired with the
appliance.
Note: Repeat this procedure if you do not hear a beep within 30
seconds.
Switching on fan
1. Touch the '+' key.
▷ The cooker hood switches on at speed 1.
Setting the extraction level
1. Touch the '+' or '-' key one or more times to select a higher or
lower setting (0-1-2-3-P).
▷ The highest setting is intensive setting P (setting 4).
▷ The intensive setting switches off automatically after 4 minutes.
After this, the fan switches to setting 2.